Water Based Urethane Penetrating Leather Dye
Designed for use on Wax Pull Up Leathers
Leather World Technologies Wax Aniline Recoloring Kit comes with all the necessary products to properly clean, condition, recolor and rewax your Aniline Leather. It also includes all the necessary application tools and a detailed instruction booklet that will make your project as easy as 123. The professional grade products included in our Wax Aniline Recoloring Kit are sure to give you results of a professional recolor to your worn or sun faded leather and give your leather that "Fresh and New" look again!!
Leather World Technologies Aniline Dye that is included in your kit is a true professional grade Aniline Leather Dye that is imported from Italy and is used by major Leather Tannery's all over the world. There is no need to call professional repair person when all the products they use are now available to you in one easy to use kit. With over 30 years of Experience in the Leather Repair Industry Leather World Technologies is here to answer any questions you may have and be there for you through the process. Please see our Leather Repair Manual or watch our Leather Repair Videos for additional information about the Leather Repair process.
Below are approximate dye measurements (use about 1/2 of these amounts for a touch up):
Select one of the five kit sizes available in the drop-down menu above.
| 8oz Recoloring Kit contains: | 16oz Recoloring Kit contains: | 32oz Recoloring Kit contains: |
|---|---|---|
|
|
|
| 64oz Recoloring Kit contains: | 128oz Recoloring Kit contains: | Product Features: |
|
|
|
STEP 1 - Clean the Leather and Remove Original Wax Coating:
To begin, use the Color Prep & Cleaner and Gray Scuff Pads to remove any existing wax buildup and prepare the leather for dyeing. The cleaner is specially formulated to remove dirt, grime, and wax buildup without damaging the leather. The original wax coating has been sufficiently removed when water will absorb almost instantly and the leather feels suede-like. If you have stains in the leather from Body Oils, this product will not remove them. You will need our Leather Degreaser product to remove any protein/oil based stains.
STEP 2 - Condition the Leather:
Start by applying 1-2 light coats of the Leather Conditioner Cream, allowing each coat to absorb in and dry. This will get some moisture and natural oils back into the leather to help it hold the color and regain the soft and supple feel of natural leather. This step is necessary in leathers that have reached a severe fade level from the original color or has become dry.
STEP 3 - Recolor the Leather
Using the other enclosed sponge or a lint free cloth, wipe on 2-4 light coats of the Aniline Leather Dye. The dye will absorb into the leather and mix and react with what is currently there. You will want to allow the leather to dry in between each coat of Aniline Dye which is approximately 1 hour. Once the final coat of Aniline Dye has been applied, allow 24 hours of dry time before Step 4.
STEP 4 - Apply Wax Top Coat:
Using a foam paint brush or foam sponge, apply 1-2 light and even coats of the Wax Top Coat, allowing 3 hours between each coat to cure. The leather may appear dark as the Wax Top Coat is applied, but will dry to a shiny clear. Wait 24 hours after the last coat of Wax Top Coat before use.
STEP 5 - Buffing the Leather
Using the buffing cloths, just simply buff the top surface of the re-colored leather. You will want to use light pressure when buffing the leather.
Tips:
Log in
