Leather Glossary

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z



A

Aniline: The type of dye used to give the initial color to a skin. Aniline dying is the process of putting skins into a drum and allowing the dye to soak completely through

Antiqued: Leather that is dyed with one color over another (usually darker over lighter) so as to create rich highlights and an artificial aged appearance. Also called distressed leather.

Return to Index

 

B

Buffed Leather: Leather from which the top surface has been removed by abrasion. Often known as suede or nubuck

Buffing: Process used to minimize surface imperfections, creates a more uniform skin appearance.

Return to Index

 

C

Corrected Grain: Leather that has been buffed to remove blemishes, then covered with a new, artificial grain created using pigments and other finishes.

Crocking: Removing the crock, or excess coloring, that rubs off of a newly-dyed hide.

Crust: Leather which has been tanned (treated to become nonperishable) but not colored or otherwise finished.

Return to Index

 

D

Distressed: Another term for antiqued leather.

Drum Drying: The process of coloring leather by tumbling it in a rotating drum immersed in dye. A very effective method allowing maximum dye penetration.

Return to Index

 

E

Embossed Leather: Leather that has been "stamped" with a pattern applied by extreme pressure in a press to give a unique design or imitation of full grain characteristics. Sometimes leathers are embossed to make them appear to be another leather, such as embossing an alligator pattern into cowhide.

Return to Index

 

F

Fat-Liquoring: The process of replacing oils that have been leqached from the hide during processing.

Fat Wrinkles: Wrinkles in the grain of leather caused by fat deposits in the animal that creates beauty in the leather. Fat wrinkles are not visible in imitation grain leather.

Finish: Any enhancing effect applied to leather after it has been tanned. Examples are dyeing, embossing, buffing, antiquing, waxing, waterproofing, and so on.

Full Aniline: Leather receiving its color from dyes, however may receive a topical stain, wax, and/or water repellant.

Full Grain Leather: Leather which has not been altered beyond hair removal. Full grain leather is the most genuine type of leather, as it retains all of the original texture and markings of the original hide.

Return to Index

 

G

Glazed Leather: Aniline-dyed leather which has been polished to a high luster by passing through glass or steel rollers under great pressure.

Glove Leather: Lambskin or other very soft leather typically used for gloves.

Grain: A word used to describe the natural characteristics of an unprocessed hide, such as its pores, wrinkles, markings, and texture.

Return to Index

 

H

Hand: A word used to describe the feel (i.e. softness or fullness) of leather, typically upholstery leather/

Hand Antiqued: Also known as "hand rubbing". The process of skilled craftsmen hand rubbing a contrasting color onto the surface of the leather to accentuate the natural grain and embossing.

Hides: Skins of large animals, usually cattle.

Return to Index

 

I

Imitation: A variety of materials which have been made to resemble genuine leather. The great bulk of these are rubber or plastic-coated fabrics. It is unlawful to use terms connoting leather to describe imitations.

Return to Index

 

L

Leather: A hide, or skin, that has been tanned into a non-perishable state.

Liming: The process of removing hair from a raw hide through the use of chemicals.

Return to Index

 

M

Milling: Process in which tanned hides are tumbled in rotating drums using a combination of heat and a misting of water to soften the hand or enhance the grain.

Return to Index

 

N

Naked: A leather with no surface, impregnated treatment of finish other than dye matter which might mask or alter the natural state of the leather. Usually reserved for the finest quality skins.

Nap: Describes the soft, "fuzzy" effect achieved in leather by buffing or brushing.

Natural Grain: A leather that displays its original grain.

Nubuck: A leather whose surface has been buffed and brushed to create a soft, velvety effect. Differs from suede in that while suede is created from the flesh (inner) side of a hide, nubuck is created using the grain (outer) side, giving it added strength and durability.

Return to Index

 

O

Oil Tanned: Leather that is tanned using oils to create a very soft, pliable finish.

Return to Index

 

P

Patent Leather: Leather with a glossy impermeable finish produced by successive coats of drying oils, varnish, or synthetic resins.

Patina: The aura or luster that develops in a quality piece of leather with age.

Perforated: Leather in which a pattern of small holes is stamped using a die.

Pigmented Leather: Leather that has been coated with a flat surface color on top of or instead of the usual dye finish. Leather is usually pigmented to add durability and hide natural blemishes.

Plating: The process of pressing leather under a heated plate. Often used in upholstery leather to mask imperfections.

Pull-Up: Describes the behavior of leather that has been treated with oils, waxes, and dyes in such a way that when the leather is pulled or stretched (i.e. on upholstery), the finish becomes lighter in the stretched areas. Considered a mark of high quality.

Pure Aniline: Leather which receives all its color from dyes only and exhibits natural markings and characteristics.

Return to Index

 

R

Retan: A second finish added over an underlying tannage.

Return to Index

 

S

Saddle Leather: Vegetable-tanned cattle hide leather for harnesses and saddles, usually of a natural tan shade and rather flexible.

Sauvage: A coloring effect created by blending two similar dyes to create a mottled or marbled appearance.

Semi-Aniline: Aniline leather to which a matching pigment layer is added to even out the color and add protection.

Shrunken Grain: A full, natural-grain leather which is shrunken to enlarge and enhance the grain of the leather.

Side Leather: Leather made from one half, or "side", of a full hide. Typically refers to leather whose top grain (outermost layer) has been left intact.

Split Leather: Leather made from the lower (inner or flesh side) layers of a hide that have been split away from the upper, or grain, layers. Split leather is more fragile than side leather or full-grain leather, and is typically used in the form of suede.

Suede: Split leather that has been buffed and brushed to create a fuzzy surface feel.

Return to Index

 

T

Tanning: The process of converting a raw hide into a stable, non-perishable state.

Top Coat: Synthetic transparent resins applied as a protective coating producing either a high gloss or a matte finish.

Top Grain: Leather whose top (outermost) layers have been left intact, in contrast to split leather.

Two-Tone: An effect created by applying layers of similar or contrasting dyes to a piece of leather in order to create a mottled or aged appearance. Antiqued and Sauvaged leathers are examples of two-tone leathers.

Return to Index

 

U

Upholstery Leather: Leather created from a whole hide and intended for use in furniture, automobiles, airplanes, and other upholstery applications.

Return to Index

 

V

Vegetable Tanning: A method of hide tanning which utilizes materials from organic materials such as bark instead of the traditional chemicals. Vegetable tanned leather has greater body and firmness than traditionally-tanned leather.

Return to Index

 

W

Weight: A term which describes the heaviness or thickness of leather. Typically given in ounces per square foot or millimeters (thickness).

Whole Hide: Refers to leather created using a full hide, as opposed to a side, and typically intended for use as upholstery leather.

Return to Index