The Deluxe Leather Repair Kit contains:
- Leather Dye Colorant
- Leather Color Prep & Cleaner
- Leather Protection Cream
- 1/2oz Leather Adhesive
- Leather Filler
- Sub-Patch Material
- Scuff pad
- Palette Knife
- Gloves & Instructions
Deluxe Leather Repair Kit
Leather World Technologies Deluxe Leather Repair Kit comes with all the necessary products to make most average size Leather Repairs along with the necessary products to properly prep, recolor and protect your leather or vinyl. It also includes all the necessary application tools and a detailed instruction booklet to make your repair as easy as 123. The professional grade products included in our Deluxe Leather Repair Kit are sure to give you results of a professional Leather Repair to your worn leather or damaged leather and give your leather that Fresh and New look again!!
Leather World Technologies Dye Colorant that is included in your kit is a True Water-Based All-In-One professional grade top coating leather dye. This means your adhesion properties, the color and your top coat are all included in one easy step. If you would like to make your leather even more durable for high use items we recommend looking at our top of the line Top Coat. This product will help add sheen if needed as it comes in Low, Semi and High gloss and will add an extra clear protective coat for even the heaviest of uses. There is no need to call professional leather repair person when all the products they use are now available to you in one easy to use kit. With over 30 years of Experience in the Leather Repair Industry Leather World Technologies is here to answer any questions you may have and be there for you through the process. Please see our Leather Repair Manual or watch our Leather Repair Videos for additional information about the Leather Repair process.
Below are approximate dye measurements for a color change (use about 1/2 these amounts for a simple cover-up):
- Small chair / Bucket seat - 8oz
- Recliner - 16oz
- Sofa / Love seat - 32oz
- 3 piece set - 64oz (1/2 gal)
- 5 piece set - 128oz (1 gal)
Select one of the five kit sizes available in the drop-down menu above.
|Standard Repair Kit contains:||Recliner Repair Kit contains:||Sofa Repair Kit contains:|
|3-Piece Repair Kit contains:||5-Piece Repair Kit contains:|
STEP 1 - Prep & Clean the Area:
Spray the Color Prep & Cleaner to all areas that are going to be re-colored. Using the enclosed Scuff Pad, scuff the leather to prepare it to accept the Dye Colorant. DO NOT scratch the surface with the scuff pad; apply only light pressure to the leathers surface. Wipe clean and allow the leather to dry before moving on to the next step. For repairs, trim off any frayed or excess material. On burn damages, scrape off any charred area before repairing.
*Color Prep & Cleaner will not remove oil based staining. You will need Leather Master Degreaser for any oil or protein based stains.
STEP 2 - Inserting the Sub-Patch (Backing Material):
Trim away any frayed edges on the leather. Cut the sub-patch material about 1/4 bigger than the repair. Insert sub-patch into the leather and secure it with the WB-1 adhesive. Smooth out the surface making sure the leathers surface lies smooth. If padding is missing, add some cotton or foam to make area level. Apply the WB-1 Adhesive working it between the edges of the sub-patch and leather. Press together, let dry for a minimum of 30 minutes. You may use a hair dryer to speed up the drying time. After the patch had dried, fill the area with filler.
*Small holes less that 1/4 may not need the backing material.
STEP 3 - Applying the Filler:
Use the applicator to fill the area between the two pieces of material. It is recommended that you apply several thin coats versus one thick coat. This will give you more strength in your repair and ensure that the filler has properly cured before adding color. Make sure each layer is dry before adding additional filler. You may use a hair dryer to assist in drying. Hold the hair dryer at a 30° angle and at least 12 from repair surface. Make sure the filler is level with both pieces of leather. You may need to lightly sand to get an even surface.
*If you have surface scratches then you will need Leather World Finish Filler. The Finish Filler will build any rough and uneven surfaces up to be sanded and smoothed out. For deeper scratches that are not torn through the leather, Leather World Base Coat has more solids and can be used to build up the leathers finish to even it out.
STEP 4 - Applying the Color:
Test the color first in an inconspicuous area before you start dyeing your repair to make sure the color matches. The Dye Colorant can be applied by spraying or using the enclosed sponge. Make sure all adjoining areas are cleaned around the outer edges of the repair area. Put dye in sprayer or on sponge and apply LIGHT coats to the leathers surface. It will take between 2-4 coats of the leather dye to fully achieve the color of the dye. You will want to allow 4-6 hours of dry time between each coat and 24 hours of dry time after the final coat before use. You may use a hair dryer to speed up dry time. If the area is not completely smooth you can add another coat of Leather Filler or Base Coat before applying the next coat of Dye Colorant. If more Filler or Base Coat is needed, we recommend adding a little bit of color to the product before its applied.
*Spraying the dye will allow more of an even distribution onto the leathers surface. If you do not have a sprayer we recommend the Crown Spra Tool Kit.
STEP 5 - Applying Protection Cream:
After 24-48 hours apply a light coating of Leather Protection Cream for added durability and protection against general soiling.
97 Reviews Hide Reviews Show Reviews
The product results were outstanding, better than hoped for and easy to use. Only sorry I didn't take before pictures.
I used it for the steering wheel of my Mercedes e320, 100% satisfied with the results, before I had used the dyes for the seats, as always, excellent.
they didn't have my color but gave me a site to get it--thank
i got a whole leather interior from a 1986 L7 from the junk yard. Needless to say it was a mess! The dye was completely gone in the wear areas and there were many scratches in the Leather. I sanded and filled the scratched and cracked areas and dyed my seats with the semi gloss dye and my seats now look amazing. Even the drivers seat which was terribly cracked looks 100% better. i would highly recommend Leather world and you will save hundreds or even thousands of dollars in the process.
I have a 1974 jaguar xle with original leather seats. Leather in good shape finish terrible. Now they look fantastic and it only took a few hours.
Bmw m3 2002 shows dove gray N5TT color on vin check. Your color chart shows dove gray 436. After applying on arm rest ( great product) The color is off (too light) Can it be 438 instead?
Pleased with the product and seats turned out great. But the original box shipped was missing the filler, adhesive and the spread sticks. I did get them the following Monday, 3 days later. I did not need the adhesive which was fine but the tube had leaked and the glue was on everything in the package. It was still wet so I was able to clean it off the filler bottle and the spreader. Perhaps the tube of adhesive should be in a separate bag.
I,m happy just takes a lot of coats to match the color very time consuming.
It is my first time attempt at leather restoration or repair. I opted for Leather Worlds deluxe restoration kit because of the pre mixed dies. With some trepidation I began the refinish and repair. The instructions were clear and product applied properly. I feel like a pro the way my seat turned out!
Great customer service, shipping, and product!